| Peer-Reviewed

Air Permeability, Drying, Blowing

Received: 9 September 2014     Accepted: 12 September 2014     Published: 17 October 2014
Views:       Downloads:
Abstract

The paper summarizes some experience with air permeability modeling in the area of air filtering, clothes design, yarns dyeing, etc. Next part deals with surfaces blowing and drying, used in various branches of industry. The received results describe actual situation and give the direction of next progress in both research and plant operation.

Published in International Journal of Mechanical Engineering and Applications (Volume 3, Issue 1-1)

This article belongs to the Special Issue Numerical Flow Simulations in Textile Industry

DOI 10.11648/j.ijmea.s.2015030101.17
Page(s) 40-46
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2014. Published by Science Publishing Group

Keywords

Numerical Flow Simulation, Air Permeability, Filter Resistance, Cloth Permeability, Fabric Drying

References
[1] Software Fluent
[2] K. Adamek, "Warming chamber for production of insulating panels", report VUTS Liberec, 2006 (in Czech).
[3] K. Adamek, "Polycondensating chamber for production of insulating mats", report VUTS Liberec, 2007 (in Czech).
[4] K. Adamek, "Fabric air permeability modeling", 13th Int. Conf. STRUTEX (Structure and Structural Mechanics of Textiles), TU Liberec, 2006. ISBN 80-7372-135-x.
[5] K. Adamek, "Permeability of textile layers", XVIth Int. conf. Applic. of exp. and numer. meth. in fluid mech.. ZU Zilina, 2008. ISBN 978-80-8070-826-9 (in Czech).
[6] K. Adamek, "Luftdurchlaessigkeit der Textilien", Chemnitzer Textitechniktagung, 2008.
[7] M. Havrdova, "Permeability evaluation of clothing materials", PhD thesis, FT TU Liberec, 2004 (in Czech).
[8] L. Sindelkova, "Relation between cloth permeability and binding", diploma thesis, FT TU Liberec, 2007 (in Czech).
[9] R. Subert, "Textiles permeability at higher flow velocities", PhD thesis, FT TU Liberec, 2006 (in Czech).
[10] A. Halasova, "Evaluation of permeability of textile sandwiches under conditions of high air velocity speeds", PhD thesis, FT TU Liberec, 2007 (in Czech).
[11] K. Adamek, "Device for permeability measuring of wound bobbin", Czech utility design, 2014.
[12] J. Fabera, M. Stejskal, K. Adamek, "Application of thermovision to evaluating heating unevenness of fabric during drying and to comparing drying performances", 13th Conf. Strutex, TU Liberec, 2006. ISBN 80-7372-135-x.
[13] M. Stejskal, M., K. Adamek, J. Fabera, "Study of new principles of impact drying and development of new jet systems of drying machines", report VUTS Liberec, grant No. VCT2 (TS), 2009 (in Czech).
[14] K. Adamek, "Intensives Blasen der Oberflaechen" In: TRANSCOM 2003, ZU Zilina, ISBN 80-8070-085-0.
Cite This Article
  • APA Style

    Karel Adamek, Jaroslav Fabera, Milan Stejskal, Antonín Havelka, Stanislav Franc. (2014). Air Permeability, Drying, Blowing. International Journal of Mechanical Engineering and Applications, 3(1-1), 40-46. https://doi.org/10.11648/j.ijmea.s.2015030101.17

    Copy | Download

    ACS Style

    Karel Adamek; Jaroslav Fabera; Milan Stejskal; Antonín Havelka; Stanislav Franc. Air Permeability, Drying, Blowing. Int. J. Mech. Eng. Appl. 2014, 3(1-1), 40-46. doi: 10.11648/j.ijmea.s.2015030101.17

    Copy | Download

    AMA Style

    Karel Adamek, Jaroslav Fabera, Milan Stejskal, Antonín Havelka, Stanislav Franc. Air Permeability, Drying, Blowing. Int J Mech Eng Appl. 2014;3(1-1):40-46. doi: 10.11648/j.ijmea.s.2015030101.17

    Copy | Download

  • @article{10.11648/j.ijmea.s.2015030101.17,
      author = {Karel Adamek and Jaroslav Fabera and Milan Stejskal and Antonín Havelka and Stanislav Franc},
      title = {Air Permeability, Drying, Blowing},
      journal = {International Journal of Mechanical Engineering and Applications},
      volume = {3},
      number = {1-1},
      pages = {40-46},
      doi = {10.11648/j.ijmea.s.2015030101.17},
      url = {https://doi.org/10.11648/j.ijmea.s.2015030101.17},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.s.2015030101.17},
      abstract = {The paper summarizes some experience with air permeability modeling in the area of air filtering, clothes design, yarns dyeing, etc. Next part deals with surfaces blowing and drying, used in various branches of industry. The received results describe actual situation and give the direction of next progress in both research and plant operation.},
     year = {2014}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Air Permeability, Drying, Blowing
    AU  - Karel Adamek
    AU  - Jaroslav Fabera
    AU  - Milan Stejskal
    AU  - Antonín Havelka
    AU  - Stanislav Franc
    Y1  - 2014/10/17
    PY  - 2014
    N1  - https://doi.org/10.11648/j.ijmea.s.2015030101.17
    DO  - 10.11648/j.ijmea.s.2015030101.17
    T2  - International Journal of Mechanical Engineering and Applications
    JF  - International Journal of Mechanical Engineering and Applications
    JO  - International Journal of Mechanical Engineering and Applications
    SP  - 40
    EP  - 46
    PB  - Science Publishing Group
    SN  - 2330-0248
    UR  - https://doi.org/10.11648/j.ijmea.s.2015030101.17
    AB  - The paper summarizes some experience with air permeability modeling in the area of air filtering, clothes design, yarns dyeing, etc. Next part deals with surfaces blowing and drying, used in various branches of industry. The received results describe actual situation and give the direction of next progress in both research and plant operation.
    VL  - 3
    IS  - 1-1
    ER  - 

    Copy | Download

Author Information
  • VUTS – Centre of Machinery Research, Liberec, Czech Rep.

  • VUTS – Centre of Machinery Research, Liberec, Czech Rep.

  • VUTS – Centre of Machinery Research, Liberec, Czech Rep.

  • TUL – Technical University in Liberec, Faculty of Textiles, Liberec, Czech Rep.

  • VEBA – textilní zavody, Broumov, Czech Rep.

  • Sections